The robot has a custom PTZ camera mounted on the lid, so you can see where you are going. The pan goes 360 degrees and the tilt is 0 to +70 degrees. The camera has a 27X optical zoom. All the camera functions are controlled from the tablet wirelessly as you stream the video.
The Wi-Fi controlled enclosed inspection MLT-24 includes the robot, tablet with program installed and configured, Wi-Fi Bridge on robot, Ethernet converter, control board, PTZ camera. LED lights are also included on the camera tilt housing to illuminate whatever the camera is looking at. The lights can be remotely turned on and off using the tablet controller.
The robot itself is an extremely rugged well-built robot. The tracks are molded without a splice are axle mounted and direct driven by powerful right angle 42mm gear motors. The chassis is rugged and made of aluminum. The aluminum is all cut using CNC Plasma table for an exact fit-up and then hand welded.
Everything is included and configured so you just turn it on and drive it with the tablet.
As configured it has a ground clearance of about 1.5″. The width with the tracks (edge to edge) is about 13″ and the length is about 16″. The robot is equipped with 2″ wide molded tracks and custom wheels. The robot weighs about 15 pounds as configured. The standard motors drive this robot up to 300 feet per minute. Powered by a 22.2V 3Ahr Lithium-Ion battery (with charger provided) providing up to three hours of use on a single charge depending on use.